Unboxing Riding Times GT54 | 40MPH Mini E-Bike for Teens & Women | 2000W Motor, 290Nm Torque
Unpack and take out the tool kit. Take out the charger. The vehicle is quite heavy. You need to lay the box down on the ground and take it out slowly. one power charger. The toolbox contains installation tools, an instruction manual, and plastic sleeves for the rear wheel nuts. Remove the front fender. Place the front wheel disc brake disc on the ground with the disc facing upward. Install the handlebar. Install the handlebar so that the logo is horizontally centered and facing forward. Adjust the position of the brake lever controller and tighten the screws. Install the front fender. Remove the brake pad protector. Inspect to the front wheel and install the brake disc into the brake pads. Tighten the left and right nuts. Install the plastic sleeves for the rear wheel nuts. Check if the battery is securely locked in place. Turn on the power and check the battery level. Unlock the mechanical key lock on the handlebar. Hold down the power switch to turn on the device and enter the P gear. Squeeze the brake to enter riding mode. Plus button to set three speed gears, eco, STD, and turbo. Headlight button. Turn signal button. Horn button.
Ready to transform your ride? This unboxing of the Riding Times GT54 shows you the sleek mini e-bike arriving without pegs already installed, no guide. Think fast, fun, and totally customizable.
Why you’ll fall in love:
– 2000 W peak motor & 290 Nm torque for heart-pounding acceleration and hill-climbing power
– 40 MPH top speed and up to 62 miles range on the quick-release 48 V / 27 Ah battery
– Year-round thrill factor: add the snow sled kit for snowy paths, or keep it lean for summer streets—this bike lives through winter, spring, summer, and autumn
– All-terrain suspension, mini inverted fork and rear shocks soak up bumps like a dream
